5086 H116 H321 Aluminum Sheet Plate
5086 aluminum plate belongs to rust-proof aluminum, is widely used in need of high corrosion resistance, such as ships, automotive welders, pressure vessels, especially in Marine markets have greater development potential.
5086 H116, 5086H321 Marine aluminum plate can be used for yachts, cruise ships, fishing boats on the hull, hull shell, ship floor, deck, etc., and some ship components that require very high structural strength.
Common sizes and inventory of 5086 H116 H321 aluminum sheet
| Thickness (mm) | Width *Length (mm) | Width*Length (mm) | Width*Length (mm) |
|---|---|---|---|
| 1.5 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 2.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 3.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 4.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 5.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 5.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 6.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 7.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 8.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 9.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 10.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 11.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 12.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 13.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 14.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 15.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 16.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 17.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 18.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 19.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 20.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 21.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 22.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 23.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 24.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 25.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 26.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 27.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 28.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 29.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 30.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 31.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 32.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 33.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 34.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 35.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 36.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 37.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 38.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 39.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 40.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 41.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 42.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 43.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 44.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 45.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 46.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 47.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 48.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 49.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
| 50.0 | 2000mm×6000mm | 2000mm×8000mm | 1500mm×3000mm |
Mechanical properties of 5086 H116 H321 aluminum plate
| Temper | Specified thickness mm | Tensile strength Rm/MPa | Yield strength Rp0.2/MPa | Elongation min.% | Bend radiusa | Hardness HBWa | |||
|---|---|---|---|---|---|---|---|---|---|
| over | up to | min. | min. | A50 mm | A | 180° | 90° | ||
| 5086 H116 | 1.5 | 3.0 | 275 | 195 | 8 | - | 2.0 t | 2.0 t | 81 |
| 3.0 | 6.0 | 275 | 195 | 9 | - | - | 2.5 t | 81 | |
| 6.0 | 12.5 | 275 | 195 | 10 | - | - | 3.5 t | 81 | |
| 12.5 | 50.0 | 275 | 195 | 9 | - | - | 81 | ||
| 5086 H321 | 1.5 | 3.0 | 305 | 195 | 8 | - | 2.0 t | 2.0 t | 81 |
| 3.0 | 6.0 | 305 | 195 | 9 | - | - | 2.5 t | 81 | |
| 6.0 | 12.5 | 305 | 195 | 10 | - | - | 3.5 t | 81 | |
| 12.5 | 50.0 | 305 | 195 | - | 9 | - | - | 81 | |
Chemical composition of 5086 H116 H321 aluminum sheet
| Element | Chemical component % |
|---|---|
| Si | 0.40 |
| Fe | 0.50 |
| Cu | 0.10 |
| Mn | 0.20-0.70 |
| Mg | 3.5-4.5 |
| Cr | 0.05-0.25 |
| Ni | - |
| Zn | 0.25 |
| Ti | 0.15 |
| Zr | - |
| Al | Rem |
Advantages of 5086 H116 H321 aluminum plate
- Small proportion, can reduce the weight of the ship, save energy consumption, increase the load;
- Good corrosion resistance, the ship structure in the harsh Marine environment, corrosion resistance is one of the main signs of Marine alloys.
- Good machinability, 5086 aluminum alloy is easy to process and form, suitable for complex ship structures.
- Excellent welding performance, Marine aluminum plate requires good welding crack resistance, welding caused by the trend of cracks to be small. The 5086 aluminum sheet is easy to weld, which helps in manufacturing and servicing.
- Cold, hot forming performance is good, shipbuilding to undergo cold processing and hot processing of a variety of treatments, easy to process molding, does not produce cracks, does not affect the strength and corrosion resistance.
- Good toughness, 5086 aluminum plate has better toughness and deformation, can be a good resistance to impact or vibration.
Application of 5086 H116 H321 aluminum plate sheet
Hull structure
5086 aluminum alloy ship plates can be used in various parts of the hull, such as the bottom of the hull, the side walls of the hull, etc., as part of the hull structure. Its high strength and good corrosion resistance allow the hull to maintain its structural integrity for a long time in a seawater environment.
Ship deck
Used in the manufacture of ship decks, 5086 aluminum alloy ship plates are able to withstand the pressure and load of the ship during operation, and are relatively light, helping to reduce the ship's own weight.
Ship internals
In addition to the hull structure and deck, 5086 aluminum alloy ship plates can also be used for the manufacture of internal components of the ship, such as partitions, bulkheads, lockers and so on.
Ocean engineering
In addition to ship manufacturing, 5086 aluminum alloy ship plates can also be used in Marine engineering, such as manufacturing offshore platforms, offshore facilities, etc., because of its excellent corrosion resistance, it can be used in harsh Marine environments for a long time.
Fishery equipment
In the fishing industry, this plate can also be used to make fishing boats, fishing gear boxes, fish tanks and other equipment, because of its strong resistance to seawater corrosion, and relatively light.
Related products
