7050 T7451 T73651 Aluminum Sheet Plate
7050 T7451 T73651 Aluminum Sheet is known as the "flying" aluminum sheet, characterized by excellent stress corrosion cracking resistance and outstanding peel resistance. Additionally, 7050 T7451 exhibits better toughness, corrosion resistance, and good anodizing performance.
Due to its low sensitivity to quenching, 7050 T7451 can maintain high strength performance for a longer time in thicknesses of 3-6 inches compared to other high-strength alloys. Therefore, 7050 T7451 is particularly suitable for thick plate applications.
7050 T7451 aluminum sheet hot selling sizes
Chalco is China's largest aluminum plate manufacturer and supplier. We have the capability to saw cut 7050 T7451 Aluminum Sheet into any size, maintaining tolerances within ±0.005 inches.
Even with the most stringent customer requirements, we ensure your satisfaction!
| Description | Temper | Thickness (in) | Width (in) | Length (in) |
|---|---|---|---|---|
| Aluminum Sheet 7050-T7451 0.25" (t) | T7451 | 0.25" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 0.375" (t) | T7451 | 0.375" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 0.5" (t) | T7451 | 0.50 " | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 0.625" (t) | T7451 | 0.625" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 0.75" (t) | T7451 | 0.75" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 1" (t) | T7451 | 1" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 1.25" (t) | T7451 | 1.25" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 1.75" (t) | T7451 | 1.75" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 2" (t) | T7451 | 2" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 2.25" (t) | T7451 | 2.25" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 2.5" (t) | T7451 | 2.5" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 2.75" (t) | T7451 | 2.75" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 3" (t) | T7451 | 3" | 48.50 " | 144.5" |
| Aluminum Sheet 7050-T7451 3.25" (t) | T7451 | 3.25" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 3.5" (t) | T7451 | 3.5" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 3.75" (t) | T7451 | 3.75" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 4" (t) | T7451 | 4" | 48" | 144" |
| Aluminum Sheet 7050-T7451 4.25" (t) | T7451 | 4.25" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 4.5" (t) | T7451 | 4.5" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 4.75" (t) | T7451 | 4.75" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 5" (t) | T7451 | 5" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 5.25" (t) | T7451 | 5.25" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 5.5" (t) | T7451 | 5.5" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 6" (t) | T7451 | 6" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 6.25" (t) | T7451 | 6.25" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 6.5" (t) | T7451 | 6.5" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 7" (t) | T7451 | 7" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 7.75" (t) | T7451 | 7.75" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 8" (t) | T7451 | 8" | 48.50" | 144.5" |
| Aluminum Sheet 7050-T7451 8.5" (t) | T7451 | 8.5" | 48.50" | 144.5" |
Chalco's produced 7050 T7451 aluminum sheet boasts advantages of consistent grain control and low residual stress.
Additionally, owing to its highly automated manufacturing process, Chalco's products exhibit outstanding flatness and batch-to-batch quality consistency.
7050 T7451 aluminum sheet mechanical properties
| Mechanical behavior | Metric | Imperial |
|---|---|---|
| Hardness, Brinell | 140 | 140 |
| Hardness, Knoop | 177 | 177 |
| Tensile Strength, Ultimate | 524 MPa | 76000 psi |
| Tensile Strength, Yield | 469 MPa | 68000 psi |
| Elongation at Break | 11% | 11% |
| Modulus of Elasticity | 71.7 GPa | 10400 ksi |
| Poissons Ratio | 0.33 | 0.33 |
| Shear Modulus | 26.9 GPa | |
| 3900 ksi |
7050 T7451 aluminum sheet thermal properties
| Thermal Properties | Metric | English |
|---|---|---|
| Specific Heat Capacity | 0.860 J/g-°C | 0.206 BTU/lb-°F |
| Thermal Conductivity | 157 W/m-K | 1090 BTU-in/hr-ft²-°F |
| Melting Point | 488 - 629.4 °C | 910 - 1165 °F |
| Solidus | 488 °C | 910 °F |
| Liquidus | 629.4 °C | 1165 °F |
7050 T7451 aluminum sheet chemical composition
| Element | Composition (%) |
|---|---|
| Al | Remainder |
| Si | 0.12 |
| Fe | 0.15 |
| Cu | 2.0-2.6 |
| Mn | 0.1 |
| Mg | 1.9-2.6 |
| Cr | 0.04 |
| Zn | 5.7-6.7 |
| Ti | 0.06 |
| Zr | 0.08-0.15 |
| Other(each) | 0.05 |
| Other(total) | 0.15 |
7050 T7451 aluminum sheet application
Aerospace applications
The high strength and stress corrosion cracking resistance of 7050 T7451 aluminum sheet make it an excellent choice for aerospace components under extreme conditions.
It is suitable for structural elements in aerospace vehicles such as spacecraft and aircraft, including fuel tanks, oil tanks, engines, aircraft bolts, and wheel components.
It is also used in the body frames, wings, and other crucial parts of military helicopters and drones.
Given its suitability for thick plate applications, it can be utilized in cabin walls, casings, fuselages, and wing skins.
Marine equipment
The high strength, corrosion resistance, and toughness of 7050 T7451 aluminum sheet make it highly suitable for marine applications. It is commonly used in high-speed patrol boats and offshore oil platform equipment.
High-end automotive components
Applicable for doors, body panels, brackets, and more. Its high strength and excellent processing performance enable these components to provide better impact performance and durability.
Military applications
It can be used for structural components in tanks, such as the body, chassis, cannons, and cannon mounts. Additionally, it is utilized in the casing, structural frames, and other critical components of missiles.
The high strength, lightweight nature, corrosion resistance, and durability of 7050 T7451 aluminum sheet provide reliable structural support for military applications while maintaining a relatively light weight, contributing to increased maneuverability and portability.
Related products
